Feed & Forage Handling - Conveyors

Rissler Conveyors

Rissler 18" Taper Board Conveyors FEATURES: • Simple Installation • Simple Maintenance • #55 or #62 Steel Detachable Chain • Adjustable Slip Clutch • Cast Sprockets • Greasable Bearings • Painted Exterior Surfaces • Conveyor available up to 130 ft. long • Feeder available up to 150 ft. long 18” DRIVE UNIT: Includes double reduction, adjustable slip clutch, greaseable bearings and cast sprockets. WOOD CONVEYOR SECTION: 18” wide, 9 1/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 130'. WOOD TAPER BOARD FEEDER: 18” wide, 91/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 150'. 24” DRIVE UNIT: Includes double reduction, heavy duty adjustable slip clutch, greaseable bearings, and cast sprockets. WOOD CONVEYOR SECTION: 24” wide, 91/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #62 detachable chain and poly flights. Priced per foot. Maximum length 100'. SPECIAL TOP DELIVERY CONVEYOR: 6” high sides above top floor. Priced per foot. 12” high, #55 or #62 chain with poly flights. DRIVE FOR SPECIAL TOP DELIVERY: Motor mount top and bottom. OPTIONS: HOPPER: Wood construction, 25”, 31” or 37” wide, 34” long and 11 1/2” high. INCLINE HARDWARE: Steel hold-down shoes with poly wear down slides. Maximum 45 degrees. Field installed. PRECUT INCLINES AND DECLINES DECLINE SIDES: 4 poly side, field installed. DROP-OUT: 12”, 15”, or 18” wide with slide rails. Field installed. COVER: Stainless. Priced per 10' section. 18” conveyor or feeder only. TOP FLOOR: Allows for conveying feed on both upper and lower feeders. Priced per foot. SECTION CONNECTING IRONS: Angle irons with bolts, painted blue. Priced per piece. FLARE BOARD: Required at each hopper, between each hopper or between hopper and incline. Rissler 18" Top & Bottom Delivery Conveyors FEATURES: • Simple Installation • Simple Maintenance • #55 or #62 Steel Detachable Chain • Adjustable Slip Clutch • Cast Sprockets • Greasable Bearings • Painted Exterior Surfaces • Conveyor available up to 130 ft. long • Feeder available up to 150 ft. long 18” DRIVE UNIT: Includes double reduction, adjustable slip clutch, greaseable bearings and cast sprockets. WOOD CONVEYOR SECTION: 18” wide, 9 1/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 130'. WOOD TAPER BOARD FEEDER: 18” wide, 91/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails #55 or #62 detachable chain and oak or poly flights. Priced per foot. Maximum length 150'. 24” DRIVE UNIT: Includes double reduction, heavy duty adjustable slip clutch, greaseable bearings, and cast sprockets. WOOD CONVEYOR SECTION: 24” wide, 91/4” high with 3 coats of polyurethane on surface in contact with feed and painted on exterior surface. Oak or poly rails, #62 detachable chain and poly flights. Priced per foot. Maximum length 100'. SPECIAL TOP DELIVERY CONVEYOR: 6” high sides above top floor. Priced per foot. 12” high, #55 or #62 chain with poly flights. DRIVE FOR SPECIAL TOP DELIVERY: Motor mount top and bottom. OPTIONS: HOPPER: Wood construction, 25”, 31” or 37” wide, 34” long and 11 1/2” high. INCLINE HARDWARE: Steel hold-down shoes with poly wear down slides. Maximum 45 degrees. Field installed. PRECUT INCLINES AND DECLINES DECLINE SIDES: 4 poly side, field installed. DROP-OUT: 12”, 15”, or 18” wide with slide rails. Field installed. COVER: Stainless. Priced per 10' section. 18” conveyor or feeder only. TOP FLOOR: Allows for conveying feed on both upper and lower feeders. Priced per foot. SECTION CONNECTING IRONS: Angle irons with bolts, painted blue. Priced per piece. FLARE BOARD: Required at each hopper, between each hopper or between hopper and incline. Rissler 11" Single Chain Conveyors FEATURES: • Simple Installation • Simple Maintenance • #55 or #62 Steel Detachable Chain • Adjustable Slip Clutch • Cast Sprockets • Greasable Bearings • Painted Exterior Surfaces • Conveyor available up to 130 ft. long • Feeder available up to 150 ft. long DRIVE UNIT: Double reduction. WOOD CONVEYOR SECTION: 11” wide with 3 coats of polyurethane on surface in contact with feed and painted on exterior. #55 or #62 detachable chain and oak or poly slats. Priced per foot. HOOPER: Wood construction. COVER: Stainless. Priced per 10' section. OPTIONS: HOPPER: Wood construction, 25”, 31” or 37” wide, 34” long and 11 1/2” high. INCLINE HARDWARE: Steel hold-down shoes with poly wear down slides. Maximum 45 degrees. Field installed. PRECUT INCLINES AND DECLINES DECLINE SIDES: 4 poly side, field installed. DROP-OUT: 12”, 15”, or 18” wide with slide rails. Field installed. COVER: Stainless. Priced per 10' section. 18” conveyor or feeder only. TOP FLOOR: Allows for conveying feed on both upper and lower feeders. Priced per foot. SECTION CONNECTING IRONS: Angle irons with bolts, painted blue. Priced per piece. FLARE BOARD: Required at each hopper, between each hopper or between hopper and incline.